iPhone 4S - Charging Dock Connector & Loud Speaker and WiFi Antenna Replacement

Giriş

If you have a problem with charging, connecting with iTunes, don't hear you in a phone call, connecting with WiFi, ringing.

In this video manual we will show you how to change / replace the iPhone 4S USB Charging Port Dock Connector Flex Cable with Mic and inner Ringer / Loud Speaker & WiFi Antenna flex.

Please SUBSCRIBE to my channel ツ

Neye ihtiyacın var

Videoya Genel Bakış

Adım 1 Dock Connector

iPhone 4S - Charging Dock Connector & Loud Speaker and WiFi Antenna Replacement, Dock Connector: adım 1, 1 resimden 1.

If present, remove the small strip of tape covering one of the dock connector screws.

Düzenle

Adım 2

Use a plastic opening tool to flip up the retaining flap on the home button ribbon cable ZIF socket.
Be sure you are prying up on the hinged retaining flap, not the socket itself.

Düzenle

Adım 3

Use a pair of tweezers to pull the home button ribbon cable out of its socket.
There are tiny components on the back side of the ribbon, so be careful not to damage them upon ribbon removal.

Düzenle

Adım 4

Carefully pull the rubber microphone holder out of its tube in the bottom edge of the iPhone.

Düzenle

Adım 5

Remove the two 1.3 mm Phillips screws securing the dock connector to the case of the iPhone.

Düzenle

Adım 6

Remove the tiny rubber spacer near the dock connector.

Düzenle

Adım 7

Use the edge of a plastic opening tool to peel the dock connector and its cable off the black plastic case of the iPhone.
If you are replacing the dock connector with a new part, make sure to transfer the rubber casing around the microphone. You can do this using a spudger.

Düzenle