Zorluk
Kolay
Adımlar
4
Gerekli Süre
5 dakika
- Pentalobe Screws % 1 adım
Öne Çıkan Kılavuzlar
Bu kılavuz, iFixit kadrosu tarafından acayip havalı bulundu.
Giriş
Just like in the iPhone 4, Apple has done their best to lock you out of your phone with two 5-point "Pentalobular" screws on either side of the dock connector.
This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws. Phillips drivers are much more readily available, and the screws are less likely to strip, making all of your future repairs and modifications much easier and more accessible.
Aletler
Hiçbir alete gerek yok.
-
iFixit's iPhone 4/4S Liberation Kit includes:
-
One 5-Point Pentalobe screwdriver
-
One #000 Phillips screwdriver
-
Two 3.6 mm "Liberation" Phillips screws
-
-
Are you ready to break the shackles of hardware oppression and liberate your iPhone? Let's rock!
-
Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
-
Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card.
-
Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
202 başka kişi bu kılavuzu tamamladı.
