Eşyalarını Tamir Et Topluluk Mağaza

iPhone 4S Power and Sensor Cable Assembly Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Giriş

Internal prerequisite.

Neye ihtiyacın var

  1. iPhone 4S Power and Sensor Cable Assembly Replacement, Power and Sensor Cable Assembly: adım 1, 2 resimden 1. iPhone 4S Power and Sensor Cable Assembly Replacement, Power and Sensor Cable Assembly: adım 1, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Use the edge of a plastic opening tool to pry the earpiece speaker off the adhesive securing it to the outer case. Note that the power button cable is glued to the the case as well, and will need to be pried up.

    • Use a pair of tweezers to unfold the earpiece speaker from its recess in the outer case.

    • Be careful not to tear the cable from the earpiece speaker. They are adhered together, and the cable is very delicate.

    Düzenle

  3. iPhone 4S Power and Sensor Cable Assembly Replacement: adım 2, 2 resimden 1. iPhone 4S Power and Sensor Cable Assembly Replacement: adım 2, 2 resimden 2.

    • Use the edge of plastic opening tool to gently move the top sensor assembly away from the outer case.

    • Gently pry the top sensor assembly off the outer case.

    Düzenle

  4. iPhone 4S Power and Sensor Cable Assembly Replacement: adım 3, 3 resimden 1. iPhone 4S Power and Sensor Cable Assembly Replacement: adım 3, 3 resimden 2. iPhone 4S Power and Sensor Cable Assembly Replacement: adım 3, 3 resimden 3.

    • Lift and remove the power and sensor cable assembly from the iPhone.

    • Be sure not to lose the small retainer clip located on the top sensor assembly.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 889