Ana içeriğe geç

Giriş

Internal prerequisite to remove the lightning connector and speaker assembly

Parçalar

Hiçbir parça belirtilmedi.

  1. iPhone 5 Lightning Connector and Speaker Assembly Replacement, Lightning Connector and Speaker Assembly: adım 1, 1 resimden 1.
    • Remove the following screws securing the Lightning connector and speaker enclosure assembly to the rear case:

    • One 2.5 mm Phillips screw

    • Two 3.3 mm Phillips screws

    • One 2.9 mm Phillips screw

    • Two 1.5 mm Phillips screws

    • One 2.8 mm Phillips screw

  2. iPhone 5 Lightning Connector and Speaker Assembly Replacement: adım 2, 3 resimden 1. iPhone 5 Lightning Connector and Speaker Assembly Replacement: adım 2, 3 resimden 2. iPhone 5 Lightning Connector and Speaker Assembly Replacement: adım 2, 3 resimden 3.
    • Use the flat end of a spudger to gently pry the Lightning connector and speaker enclosure assembly cables up from the rear case.

    • Make sure you get the spudger under the large ribbon cable connected to the assembly. Prying the rest of the assembly away from the cable may result in a tear.

  3. iPhone 5 Lightning Connector and Speaker Assembly Replacement: adım 3, 3 resimden 1. iPhone 5 Lightning Connector and Speaker Assembly Replacement: adım 3, 3 resimden 2. iPhone 5 Lightning Connector and Speaker Assembly Replacement: adım 3, 3 resimden 3.
    • Remove the Lightning connector and speaker enclosure assembly from the rear case.

    • Take care not to lose the small metal washer on the speaker enclosure, or the four small metal washers beneath the Lightning connector screws.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Üyelik tarihi: 17-10-2009

489.857 İtibar

410 adet Kılavuz yazıldı

Team

iFixit iFixit üyesi

Community

146 Üyeler

16.062 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 9

Her zaman: 1,794