Adım 1
Bu adım çevrilmemiş. Çevrilmesine yardım edin


Bu adımda kullanılan alet:
Anti-Clamp
$24.95
Satın Al



• The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.
• For complete instructions on how to use the Anti-Clamp, check out this guide.
• Pull the blue handle backwards to unlock the Anti-Clamp's arms.
• Slide the arms over either the left or right edge of your iPhone.
• Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.
• Squeeze the cups together to apply suction to the desired area.
• If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.
Düzenle
Yorum Ekle
Yorum Ekle
Yorum Ekle
1024
İptal Yorum gönder
Adım 2
Bu adım çevrilmemiş. Çevrilmesine yardım edin




• Pull the blue handle forwards to lock the arms.
• Turn the handle clockwise 360 degrees or until the cups start to stretch.
• Make sure the suction cups remain aligned with each other. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.
• Insert an opening pick or tool under the screen when the Anti-Clamp creates a large enough gap.
• If the Anti-Clamp doesn't create a sufficient gap, rotate the handle a quarter turn.
• Don't crank more than a quarter turn at a time, and wait a few seconds between turns. Let the Anti-Clamp and time do the work for you.
• Skip the next three steps.
Düzenle
2 yorum
Yorum Ekle
Yorum Ekle
1024
İptal Yorum gönder

Yazar

9 tane daha katılımcı ile

Walter Galan

694.561 İtibar

1.203 adet Kılavuz yazıldı

Rozetler: 54

• 
• 
• 

+51 tane daha rozet

Bu kılavuzu göm

Bu kılavuzu, sitenizin / forumunuzun içine küçük bir parçacık olarak yerleştirmek için, bir boyut seçin ve aşağıdaki kodu kopyalayın.

Önizleme