Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

iPhone 7 Plus Speaker Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. iPhone 7 Plus Speaker Replacement, Speaker: adım 1, 2 resimden 1. iPhone 7 Plus Speaker Replacement, Speaker: adım 1, 2 resimden 2.
    • Use a thin pry tool or tweezers to carefully pry up and disconnect the upper coaxial cable connector from the logic board.

    • There are two coaxial connectors in close proximity. Disconnect the one nearest the battery connector.

    • During reassembly, this can be tricky to reconnect. Hold the connector in place over its socket and press down with the flat of your spudger. The connector should snap into place.

  2. iPhone 7 Plus Speaker Replacement: adım 2, 2 resimden 1. iPhone 7 Plus Speaker Replacement: adım 2, 2 resimden 2.
    • Carefully de-route the coaxial cable you just disconnected from the small metal clip holding it to the logic board.

  3. iPhone 7 Plus Speaker Replacement: adım 3, 2 resimden 1. iPhone 7 Plus Speaker Replacement: adım 3, 2 resimden 2.
    • Use tweezers or the point of your spudger to pry both coaxial cables out of the metal clip holding them on the side of the speaker.

  4. iPhone 7 Plus Speaker Replacement: adım 4, 1 resimden 1.
    • Remove the five Phillips screws securing the speaker:

    • Three 1.3 mm screws

    • One 2.3 mm screw

    • One 3.3 mm screw

  5. iPhone 7 Plus Speaker Replacement: adım 5, 1 resimden 1.
Sonuç

To reassemble your device, follow these instructions in reverse order.

Jeff Suovanen

Üyelik tarihi: 08/06/13

427.901 İtibar

259 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

135 Üyeler

16.757 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 44