Ana içeriğe geç

iPhone 7 Speaker Assembly Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. iPhone 7 Speaker Assembly Replacement, Speaker Assembly: adım 1, 1 resimden 1.
    • Remove the Phillips screw securing the Wi-Fi diversity antenna to the rear case:

    • One 3.2 mm screw

  2. iPhone 7 Speaker Assembly Replacement: adım 2, 1 resimden 1.
    • Remove the following three Phillips screws securing the speaker to the rear case:

    • Two 1.3 mm screws

    • One 2.0 mm screw

  3. iPhone 7 Speaker Assembly Replacement: adım 3, 3 resimden 1. iPhone 7 Speaker Assembly Replacement: adım 3, 3 resimden 2. iPhone 7 Speaker Assembly Replacement: adım 3, 3 resimden 3.
    • Use the point of a spudger to lift the two antenna cable connectors up off of the sockets on the logic board.

  4. iPhone 7 Speaker Assembly Replacement: adım 4, 2 resimden 1. iPhone 7 Speaker Assembly Replacement: adım 4, 2 resimden 2.
    • Use tweezers to derout the antenna cables from their bracket on the logic board.

  5. iPhone 7 Speaker Assembly Replacement: adım 5, 2 resimden 1. iPhone 7 Speaker Assembly Replacement: adım 5, 2 resimden 2.
    • Use tweezers to remove the antenna cables from the clip on the speaker.

    • Make sure to grasp the cable near the clip in order to avoid damaging the cable.

  6. iPhone 7 Speaker Assembly Replacement: adım 6, 2 resimden 1. iPhone 7 Speaker Assembly Replacement: adım 6, 2 resimden 2.
    • Use the tip of a spudger to slide the speaker assembly towards the logic board and off of the rear case.

  7. iPhone 7 Speaker Assembly Replacement: adım 7, 1 resimden 1.
    • Remove the speaker.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Scott Havard

Üyelik tarihi: 06/27/16

49.558 İtibar

31 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 284