Ana içeriğe geç

Giriş

Use this guide to remove or replace the two pentalobe (five-point) screws securing the iPhone's display. These screws are a proprietary Apple design, requiring the use of a specialized P2 screwdriver.

Parçalar

Hiçbir parça belirtilmedi.

  1. Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 3.5 mm pentalobe screws on the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Sonuç

To reassemble your device, follow these instructions in reverse order.

7 farklı kişi bu kılavuzu tamamladı.

Adam O'Camb

Üyelik tarihi: 11-04-2015

134.964 İtibar

392 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

136 Üyeler

15.994 adet Kılavuz yazıldı

2 Yorum

Why. Just why.

The Stuff - Yanıt

This guide is used by many other guides as first step! Don´t laugh about it.

VauWeh - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 38

Son 30 gün: 161

Her zaman: 7,457