Ana içeriğe geç

Giriş

This guide shows how to remove the SIM card tray to replace the network SIM card in the iPhone SE 2020.

Parçalar

Hiçbir parça belirtilmedi.

  1. Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray. Press to eject the tray.
    • Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.

    • Press to eject the tray.

    • This may require a significant amount of force.

  2. Remove the SIM card tray from the iPhone. The SIM card will fall out of the tray easily.
    • Remove the SIM card tray from the iPhone.

    • The SIM card will fall out of the tray easily.

    • When reinserting the SIM card, ensure that it is in the proper orientation relative to the tray.

    • A thin rubber gasket around the SIM card tray provides water and dust protection. If this gasket is damaged or missing, replace the gasket or the entire SIM card tray to protect your iPhone's internal components.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Adam O'Camb

Üyelik tarihi: 11-04-2015

145.746 İtibar

417 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

138 Üyeler

16.993 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 21

Son 30 gün: 116

Her zaman: 2,962