Ana içeriğe geç

iPhone X Battery Replacement

Arşivlenmiş Kılavuz
Bu kılavuz sadece arşivsel amaçlarla muhafaza edilmiştir. Onarımınızı gerçekleştirmek için kılavuzun güncel halini kullanın.
    • Firstly, turn off your phone & use a special screwdriver to move 2 screws on the base.

    • Secondly, you must use the iOpener to soften the adhesive .

    • Next, clip the suction cup onto the screen

    • And lift up the screen 90 degree /by your hand

    • Then, you must remove 2 screws by screwdriver

    • And use a tweezers to lift up the metal bracket.

    • Note to avoid damaging ribbon cable between screen and base

    • Next step, Use the spudger to pry away the battery connector & 3 display connectors

    • Before pull the battery stripe by the tweezers.

    • After that, lift out the old battery/ by your hand

    • Finally, to install a new one, follow reverse steps.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Trần Thị Thùy Minh

Üyelik tarihi: 01/12/22

169 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 1,664