Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Use this guide to remove or replace the two screws securing the iPhone X's display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

  1. Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • If the screws are stripped or damaged, replace the screws.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Sonuç

To reassemble your device, follow these instructions in reverse order.

23 farklı kişi bu kılavuzu tamamladı.

Jeff Suovanen

Üyelik tarihi: 06-08-2013

340.176 İtibar

257 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

135 Üyeler

14.987 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 18

Son 7 gün: 122

Son 30 gün: 549

Her zaman: 21,893