Eşyalarını Tamir Et Topluluğa Katılın Mağaza

iPhone XS Pentalobe Screws Replacement

Giriş

Use this guide to remove or replace the two screws securing the iPhone XS display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

What you need

  1. iPhone XS Pentalobe Screws Replacement, Pentalobe Screws: adım 1, 1 resimden 1.

    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

9 farklı kişi bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Jeff Suovanen

Üyelik tarihi: 08/06/13

405.840 İtibar

258 adet Kılavuz yazıldı

Badges: 48

+45 tane daha rozet

Team

iFixit iFixit üyesi

Community

138 Üyeler

17.030 adet Kılavuz yazıldı

2 Comments

So you have not explained wether or not the iphone XS and the iphone X have identical pentalobe screws, what a guide it is, well infact i found out the hard way they are identical and replaceable with iphone x housing pentalobe screws, thanks.

Jonez K - Yanıt

On the screws what is the black stuff at the end of the screws? Because it came off my screws now I’m concerned that I have compromised the waterproof ness of my phone

Casey Hunter - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 7

Son 7 gün: 65

Son 30 gün: 249

Her zaman: 10,102