Ana içeriğe geç

iPod Nano 2nd Generation Bottom Bezel Replacement

What you need

  1. iPod Nano 2nd Generation Bottom Bezel Replacement, Bottom Bezel: adım 1, 1 resimden 1.
    • Before opening your iPod, ensure that the hold switch is in the locked position.

  2. iPod Nano 2nd Generation Bottom Bezel Replacement: adım 2, 1 resimden 1.
    • When removing the the bottom bezel, be sure not to bend the plastic surrounding the dock connector.

    • Carefully insert an iPod opening tool in the seam between the metal casing and white plastic bezel

    • Lift the bottom bezel off the iPod. It's glued on using a mild adhesive, so some force may be required.


To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.


Üyelik tarihi: 09/24/09

1 İtibar

636 adet Kılavuz yazıldı


Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 23

Her zaman: 14,505