Ana içeriğe geç

iPod Nano 2nd Generation Top Bezel Replacement

Neye ihtiyacın var

  1. iPod Nano 2nd Generation Top Bezel Replacement, Top Bezel: adım 1, 1 resimden 1.
    • Before opening your iPod, ensure that the hold switch is in the locked position.

  2. iPod Nano 2nd Generation Top Bezel Replacement: adım 2, 1 resimden 1.
    • Carefully insert an iPod opening tool in the seam between the metal casing and white plastic top.

    • Lift the top bezel off the iPod. It's glued on using a mild adhesive, so some force may be required.

Sonuç

To reassemble your device, follow these instructions in reverse order.

12 farklı kişi bu kılavuzu tamamladı.

iRobot

Üyelik tarihi: 09/24/09

1 İtibar

636 adet Kılavuz yazıldı

2 Yorum

But how do I install it on? Do I just push it back? I want to fix mine but it doesn't even have the top part anymore, or the hold switch

luis - Yanıt

I would recommend that you put some new adhesive on there. All you have to do is put the switch in its place and put on a new top and push it down.

Ad123re -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 22

Her zaman: 18,941