Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Insert a spudger under the metal midframe and display on the left side of the home button. Make sure that the spudger is under the entire display assembly to prevent bending the metal midframe.
    • Insert a spudger under the metal midframe and display on the left side of the home button.

    • Make sure that the spudger is under the entire display assembly to prevent bending the metal midframe.

    • Rotate the spudger around the home button and across the front panel, releasing the adhesive holding the display in place.

  2. Once all of the adhesive has been released, gently separate the display assembly from the front glass/digitizer.
    • Once all of the adhesive has been released, gently separate the display assembly from the front glass/digitizer.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Sam Goldheart

Üyelik tarihi: 18-10-2012

439.879 İtibar

547 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

138 Üyeler

16.477 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 44