Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

iPod Nano 7th Generation Display Assembly Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. iPod Nano 7th Generation Display Assembly Replacement, Display Assembly: adım 1, 2 resimden 1. iPod Nano 7th Generation Display Assembly Replacement, Display Assembly: adım 1, 2 resimden 2.
    • Insert a spudger under the metal midframe and display on the left side of the home button.

    • Make sure that the spudger is under the entire display assembly to prevent bending the metal midframe.

    • Rotate the spudger around the home button and across the front panel, releasing the adhesive holding the display in place.

  2. iPod Nano 7th Generation Display Assembly Replacement: adım 2, 1 resimden 1.
    • Once all of the adhesive has been released, gently separate the display assembly from the front glass/digitizer.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Sam Goldheart

Üyelik tarihi: 10/18/12

465.238 İtibar

538 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

16.560 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 69