Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.
Giriş
This guide will help you in identifying the soldering joints locations for the loud speaker on the iPod Touch 4th Generation
Neye ihtiyacın var
-
-
I've boxed where the ribbon cable connectors go for the screen and camera.
-
The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.
-
The second picture shows the wires soldered to the logic board.
-
The loud speaker replacement was very tedious job.. anyways Good Luck
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
3 farklı kişi bu kılavuzu tamamladı.
