Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

The pad is a disposable attachment that wipes the surface the robot drives over. If the cleaning pad on the iRobot Braava Jet 240 has become dirty and no longer cleans, use this guide to replace it. The cleaning pad should also be removed when replacing other parts of the robot, as the pad obscures several screws used to open the robot.

  1. Lift up the handle to reveal the eject button. Lift up the handle to reveal the eject button.
    • Lift up the handle to reveal the eject button.

  2. Use your finger to push the eject button forward. Use your finger to push the eject button forward. Use your finger to push the eject button forward.
    • Use your finger to push the eject button forward.

  3. Tilt the robot on its side and let the mop pad slide out.
    • Tilt the robot on its side and let the mop pad slide out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Claire Franz

Üyelik tarihi: 10-02-2020

1.355 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team S22-G2, Regan Winter 2020 Cal Poly, Team S22-G2, Regan Winter 2020 üyesi

CPSU-REGAN-W20S22G2

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 10

Her zaman: 149