Eşyalarını Tamir Et Topluluk Mağaza

iRobot Roomba 4100 Brush Guard Replacement

Giriş

Removing the brush guard will be easy. It won't take more than 5 minutes to complete and no tools are required.

  1. iRobot Roomba 4100 Brush Guard Replacement, Brush Guard: adım 1, 1 resimden 1.

    • Lay the Roomba upside down on a flat surface with the blue strip away from you.

    Düzenle

  3. iRobot Roomba 4100 Brush Guard Replacement: adım 2, 2 resimden 1. iRobot Roomba 4100 Brush Guard Replacement: adım 2, 2 resimden 2.

    • Use your index fingers to pull the yellow tabs towards you.

    • While still pulling the yellow tabs with your index fingers, tilt up the brush guard.

    • For reassembly, make sure to push in the brush guard until it clicks into place.

    Düzenle

  4. iRobot Roomba 4100 Brush Guard Replacement: adım 3, 1 resimden 1.

    • Pull back the brush guard to unhook it from the latches.

    • Remove the brush guard by lifting it up and out of the Roomba.

    • This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Samantha Barrett

Üyelik tarihi: 01/13/14

501 İtibar

5 adet Kılavuz yazıldı

Rozetler: 3

Ekip

Cal Poly, Team 17-5, Forte Winter 2014 Cal Poly, Team 17-5, Forte Winter 2014 üyesi

CPSU-FORTE-W14S17G5

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 703