Giriş

This is an easy guide. It should only take a few minutes to complete. It doesn't require any tools.

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. Lay the Roomba upside down on a flat surface with the blue strip away from you.
    • Lay the Roomba upside down on a flat surface with the blue strip away from you.

    Yorum Ekle

  2. Use your index fingers to pull the yellow tabs towards you.
    • Use your index fingers to pull the yellow tabs towards you.

    • While still pulling the yellow tabs with your index fingers, tilt up the brush guard.

    • For reassembly, make sure to push in the brush guard until it clicks into place.

    Yorum Ekle

    • Pull back the brush guard to unhook it from the latches.

    • Remove the brush guard by lifting it up and out of the Roomba.

    • This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

    Yorum Ekle

    • Set the brush guard aside.

    • The flexible rubber brush is the smooth, all-rubber brush that is closest to the yellow battery.

    Yorum Ekle

    • Remove the flexible rubber brush by grabbing it and pulling it up and out of the Roomba.

    • For reassembly, orient the Roomba with the battery closest to you:

      • First, insert the black end of the flexible rubber brush into the black square opening on the right side.

      • Second, lay the flexible rubber brush back into place.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Samantha Barrett

Üyelik tarihi: 13-01-2014

501 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 17-5, Forte Winter 2014 Cal Poly, Team 17-5, Forte Winter 2014 üyesi

CPSU-FORTE-W14S17G5

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 410