Ana içeriğe geç

Giriş

This guide explains how to remove the side brush motor from your Roomba.

  1. Place your Roomba upside-down on a hard surface.
    • Place your Roomba upside-down on a hard surface.

  2. While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

  3. Gently pull upwards on the brush to remove it.
    • Gently pull upwards on the brush to remove it.

  4. PC Laptop Batteries

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Hemen Alışveriş Yapın

    PC Laptop Batteries

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Hemen Alışveriş Yapın
  5. Rotate the Roomba upside-down so the bottom is facing towards you.
    • Rotate the Roomba upside-down so the bottom is facing towards you.

  6. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.
    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

  7. Carefully lift the bottom plate.
    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

  8. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly.
    • Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly.

  9. Gently pull on motor assembly to remove.
    • Gently pull on motor assembly to remove.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Aaron Jacobs

Üyelik tarihi: 31-01-2014

534 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 13-14, Regan Winter 2014 Cal Poly, Team 13-14, Regan Winter 2014 üyesi

CPSU-REGAN-W14S13G14

4 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 721