Eşyalarını Tamir Et Topluluk Mağaza

iRobot Roomba 690 Spinning Brush Replacement

Giriş

The spinning brush on the iRobot Roomba 690 is used to help sweep debris towards the roller brushes. Over time, it may need to be replaced or cleaned. This guide will explain how to replace the spinning brush. Removing the spinning brush is required when accessing components of the Roomba concealed inside the protective bottom cover, and as such performing these steps will be required to complete other guides.

Neye ihtiyacın var

  1. iRobot Roomba 690 Spinning Brush Replacement, Spinning Brush: adım 1, 1 resimden 1.

    • Place the Roomba upside down so that the wheels and brushes are facing upward.

    Düzenle

  3. iRobot Roomba 690 Spinning Brush Replacement: adım 2, 3 resimden 1. iRobot Roomba 690 Spinning Brush Replacement: adım 2, 3 resimden 2. iRobot Roomba 690 Spinning Brush Replacement: adım 2, 3 resimden 3.

    • Loosen the captive screw in the spinning brush using a Phillips #0 screwdriver.

    • Remove the spinning brush from the vacuum.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

John Galvin

Üyelik tarihi: 03/23/22

584 İtibar

5 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UMass Dartmouth, Team 1-1, Botvin Spring 2022 UMass Dartmouth, Team 1-1, Botvin Spring 2022 üyesi

UMASSD-BOTVIN-S22S1G1

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 150