Lorex MC6950 Circuit Board Replacement

Adım 4 çevriliyor

İngilizce

Flemenkçe

Adım 4

Now the motor, lens, and wires must be removed from the circuit board. There are three 5mm JIS 0 screws located on the lens side of the circuit board to remove the motor housing.
The motor housing will need to be soldered back onto the new circuit board when reassembling. The wires should come from the circuit board and connect to the motor housing on the opposite of the lens side of the circuit board.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.