Apple TV 4th Generation Power Supply/Heatsink Replacement

İngilizce

İspanyolca

Adım 5 çevriliyor

Adım 5

Insert two of your 7mm T7 Torx screws into the indicated posts on the power supply/heatsink.
Using screw removal pliers, pull up on the screws, alternating between them, until the unit is free from the case.
The fit between the case and the power supply/heatsink is very tight. However, the power supply should fall freely into place on reassembly.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.