Lorex MC6950 Motor Replacement

Adım 5 çevriliyor

İngilizce

Korece

Adım 5

The motor will be sealed in the housing. It can be removed by using a metal spudger to cut the seal. Any common sealant can be used on the replacement motor.
The motor housing will need to be soldered back onto the circuit board after the new motor is placed. The wires should come from the circuit board and connect to the motor housing on the opposite of the lens side of the circuit board.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.