Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

İngilizce
Çince
Adım 3
Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
Remove the Touch ID sensor
  • Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.

  • Flip the display assembly over. Use a hairdryer or prepare an iOpener and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.

  • Don't overheat the display. It should be slightly too hot to touch comfortably.

加热 home键/Touch ID传感器 的周围有助于软化固定排线的粘胶,使其能更容易、更安全地被移除。

将屏幕总成翻到正面。使用一个吹风机或准备一个iOpener,加热屏幕底端大约90秒来软化下面的粘胶。

不要使屏幕过热。应该加热到微热,触摸起来舒服的温度。

+[title] Remove the Touch ID sensor
[* icon_note] Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
[* black] Flip the display assembly over. Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.
[* icon_caution] Don't overheat the display. It should be slightly too hot to touch comfortably.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.