Eşyalarını Tamir Et Topluluk Mağaza

Sustitución del Puerto de Carga del PS3 Dual Shock 3

Kılavuza Dön
İngilizce
İspanyolca
Adım 3
PS3 Dual Shock 3 Controler Charging Port Replacement, Freeing the Motherboard: adım 0, 1 resimden 1.
Freeing the Motherboard

  • Remove the two screws holding the motherboard to the front controller housing.

  • Next, remove the motherboard assembly from the controller housing. This is done by pressing in the clips on each side of the handle.

  • Freeing the motherboard from the housing will provide better access to the charging port.

Liberando la placa base

Retira los dos tornillos que sujetan la placa base a la carcasa del controlador frontal.

A continuación, extrae el conjunto de la placa base de la carcasa del controlador. Esto se hace presionando los clips a cada lado del mango.

Liberar la placa base de la carcasa proporcionará un mejor acceso al puerto de carga.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.