Eşyalarını Tamir Et Topluluk Mağaza

飞利浦Hue灯泡更换

Kılavuza Dön
İngilizce
Çince
Adım 2
Philips Hue lightbulb Bulb Replacement, Screw thread contact and LED controller: adım 0, 3 resimden 1. Philips Hue lightbulb Bulb Replacement, Screw thread contact and LED controller: adım 0, 3 resimden 2. Philips Hue lightbulb Bulb Replacement, Screw thread contact and LED controller: adım 0, 3 resimden 3.
Screw thread contact and LED controller

  • Start by carefully removing the remaining broken glass parts from the Philips Hue lightbulb. On this example, glass parts have already been removed.

  • Then use your Groove Joint Pliers to gently crush and remove the screw thread contact of the IKEA lightbulb.

  • Once removed, you'll be able to extract the LED controller using your fingers. You might have to use a pliers again.

把金属螺口和LED拧下来

首先先将飞利普灯泡的玻璃小心地清除掉，在这个示例中，玻璃已经事前就清除了。

使用沟槽钳来轻轻地旋转并破坏螺口

一旦取出螺口，就可以用手拉出LED控制器，可能需要再次使用沟槽钳。

[title] Screw thread contact and LED controller
-[* black] Start with carefully removing the remaining broken glass parts on the Philips lightbulb. On this example, glass parts were removed previously.
-[* black] Use your Groove Joint Pliers to gently crush the screw thread contact.
+[* black] Start by carefully removing the remaining broken glass parts from the Philips Hue lightbulb. On this example, glass parts have already been removed.
+[* black] Then use your Groove Joint Pliers to gently crush and remove the screw thread contact of the IKEA lightbulb.
[* black] Once removed, you'll be able to extract the LED controller using your fingers. You might have to use a pliers again.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.