Ana içeriğe geç

Sostituzione gruppo schermo iMac Intel 21.5" EMC 3068

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 12 kılavuzları etkileyecektir.

Adım 3 çevriliyor

İngilizce
İtalyanca
Adım 3
iMac Intel 21.5" EMC 3068 Display Assembly Replacement: adım 0, 3 resimden 1. iMac Intel 21.5" EMC 3068 Display Assembly Replacement: adım 0, 3 resimden 2. iMac Intel 21.5" EMC 3068 Display Assembly Replacement: adım 0, 3 resimden 3.
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

Solleva lo schermo dalla cornice e rimuovilo dall'iMac.

Potresti dover sollevare lentamente da un lato per staccare l'adesivo rimanente.

Fai molta attenzione quando maneggi lo schermo: è grande, pesante e fatto di vetro.

Dopo che l'adesivo è stato tagliato, non può essere riutilizzato per sigillare il display. Segui questa guida per sostituire le strisce adesive che fissano lo schermo all'involucro posteriore.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.