Skip to main content

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 12 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 3 çevriliyor

Step 3
Lift the display up from the frame and remove it from the iMac. It may be necessary to slowly lift from one side to peel against the remaining adhesive. Be very careful handling the display—it's big, heavy, and made of glass.
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

フレームからディスプレイを持ち上げて、iMacから取り外します。

接着剤を剥がすため、必要に応じて片側からゆっくりと持ち上げてから、反対側も持ち上げます。

ディスプレイを取り扱う際は、十分ご注意ください。重量があり、大きく、ガラス製です。

接着剤が切断したら、再利用できません。このガイドに従って、ディスプレイとリアとリアエンクロージャーを固定するために接着ストリップを交換します。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.