Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
Japonca

Adım 1 çevriliyor

Adım 1
Handling the board by the edges, flip the logic board over to access the PRAM battery. The PRAM battery is secured by a spring contact and two small plastic nubs. On the side between the two plastic nubs (opposite the spring contact), gently slide an opening pick in between the battery socket wall and the battery.
  • Handling the board by the edges, flip the logic board over to access the PRAM battery.

  • The PRAM battery is secured by a spring contact and two small plastic nubs.

  • On the side between the two plastic nubs (opposite the spring contact), gently slide an opening pick in between the battery socket wall and the battery.

  • Use the opening pick to slide the battery away from the two plastic nubs.

  • Once the battery's edge clears the two nubs, use the opening pick to tilt the battery up out of its socket.

PRAMバッテリーにアクセスするには、ボードの両端を持ってロジックボードを裏返します。

PRAMバッテリーは2つの小さなプラスチックナブで固定されています。

2つのプラスチックナブ(バネコンタクトの反対側)の側面で、バッテリーソケット側面とバッテリーの間に開口ピックを慎重にスライドします。

開口ピックを使って、2つのプラスチックナブからバッテリーをスライドします。

バッテリー端が2つのナブから外れたら、開口ピックを使用してバッテリーをソケットからこじ開けて取り出します。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.