Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Japonca
Adım 3
One T5 (lower) and one PH00  (upper) screwdriver heads are needed to remove the battery's connector shield. Then use a spudger to pry the battery's connector from the motherboard. Be sure to pry with even pressure. Then use a spudger to pry the battery's connector from the motherboard. Be sure to pry with even pressure.
Disconnect Battery
  • One T5 (lower) and one PH00 (upper) screwdriver heads are needed to remove the battery's connector shield.

  • Then use a spudger to pry the battery's connector from the motherboard. Be sure to pry with even pressure.

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.