Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 10 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 1 çevriliyor

Adım 1
Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive. Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in. If the adhesive is hard to cut, use an iOpener to loosen it.
  • Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive.

  • Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in.

  • If the adhesive is hard to cut, use an iOpener to loosen it.

将三角撬片的尖端插入后盖和中框之间,并将其滑到手机周围,以切割粘合剂。

如果粘合剂难以切割,请使用 iOpener 将其松开。

[* black] Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive.
[* black] Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in.
[* icon_note] If the adhesive is hard to cut, [guide|11677|use an iOpener] to loosen it.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.