Ana içeriğe geç

Samsung Galaxy S7 Vervanging van de glazen achterkant

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

Adım 7 çevriliyor

İngilizce
Flemenkçe
Adım 7
Samsung Galaxy S7 Rear Glass Replacement: adım 0, 2 resimden 1. Samsung Galaxy S7 Rear Glass Replacement: adım 0, 2 resimden 2.
  • To reinstall the back cover with a custom-cut adhesive strip, follow this guide.

  • If you're cleaning the midframe surface with isopropyl alcohol, be careful not to get any alcohol on the wireless charging coil. The coil coating will break down if it contacts alcohol.

  • Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.

  • If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.

Om de glazen achterkant opnieuw te installeren met een vooraf op maat gesneden kleefstrip gebruik je deze handleiding.

Als je het oppervlak van het midframe schoonmaakt met isopropylalcohol, zorg er dan voor dat er geen alcohol op de draadloze oplaadspoel komt. De coating van de spoel zal worden aangetast als deze in contact komt met alcohol.

Zorg dat je je telefoon inschakelt en je je telefoon test voordat je de nieuwe kleefstrips aanbrengt en je je telefoon definitief sluit.

Als je wilt, kun je de achterste behuizing weer installeren zonder vervangende kleefstrips. Verwijder alle grote lijmresten die kunnen voorkomen dat de achterkant goed past. Na het installeren verwarm je de achterste behuizing en druk je deze stevig vast. Het zal niet waterdicht zijn, maar de lijm is vaak genoeg om de achterkant weer te bevestigen.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.