Ana içeriğe geç
İngilizce
Fransızca
Adım 3
Identify the two mounting bolts on the rear of the caliper. Using a 12 mm wrench or socket, remove the two caliper mounting bolts. Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, rotate the caliper up and away from the rotor to access the brake pads. If you do this, skip the next step.
  • Identify the two mounting bolts on the rear of the caliper.

  • Using a 12 mm wrench or socket, remove the two caliper mounting bolts.

  • Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, rotate the caliper up and away from the rotor to access the brake pads. If you do this, skip the next step.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.