Ana içeriğe geç
İngilizce
Flemenkçe

Adım 6 çevriliyor

Adım 6
Remove four T10 Torx screws securing the power supply to the rear case. The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.
  • Remove four T10 Torx screws securing the power supply to the rear case.

  • The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.

  • Lift the power supply out of the rear case, minding the AC-in cable that may get caught.

  • Do not touch the face of the power supply board to avoid electric shock.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.