Adım 15 çevriliyor
Adım 15
Sensorbackplate
-
Unscrew these 6 screws, after you have taken the optics out of the case. Note that the three motor screws where in place during the photo, but should be removed first
-
To be able to separate the Sensorbackplate from the rest, you have to unsolder the conenctor
-
Also disconnect this connector, as well as the connector on the opposite site
-
Finally you have the sensor with (maybe?) the auto focus lens.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.