Eşyalarını Tamir Et Topluluk Mağaza

Installation du cadre intérieur du Mac mini modèle A1176

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 21 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Fransızca
Adım 4
Mac mini Model A1176 Internal Frame Replacement: adım 0, 2 resimden 1. Mac mini Model A1176 Internal Frame Replacement: adım 0, 2 resimden 2.

  • Rotate the mini so that the SuperDrive slot loading mechanism is facing you.

  • Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board.

  • Use tweezers to grab the connector (as seen in the picture), not the wires.

  • The connector is located under the optical drive opening, next to the PRAM battery.

Faites pivoter le mini de sorte que le mécanisme de chargement de l'emplacement du SuperDrive se trouve face à vous.

À l'aide d'une pince, soulevez le connecteur du câble du capteur thermique du disque dur hors de sa prise sur la carte mère.

À l'aide de la pince, saisissez le connecteur (comme illustré), mais pas les fils.

Le connecteur se trouve sous l'ouverture du lecteur optique, à côté de la batterie PRAM.

[* icon_note] Rotate the mini so that the SuperDrive slot loading mechanism is facing you.
-[* black] Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board.
+[* black] Use a pair of [product|IF145-020|tweezers] to lift the hard drive thermal sensor cable connector up off its socket on the logic board.
[* icon_caution] Use tweezers to grab the connector (as seen in the picture), ***not the wires***.
[* icon_note] The connector is located under the optical drive opening, next to the PRAM battery.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.