Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 3 kılavuzları etkileyecektir.

İngilizce
Fransızca
Adım 2
Use the point of a spudger to gently pry the proximity sensor out of its recess on the front panel. Try to get your tool all the way under the sensor to pry it away from the clear plastic beneath. If you pry only against the cable, the sensor may separate from the cable assembly and will need replacement. If you're replacing the sensor/cable assembly anyway, then it doesn't matter.
  • Use the point of a spudger to gently pry the proximity sensor out of its recess on the front panel.

  • Try to get your tool all the way under the sensor to pry it away from the clear plastic beneath. If you pry only against the cable, the sensor may separate from the cable assembly and will need replacement. If you're replacing the sensor/cable assembly anyway, then it doesn't matter.

Prenez la pointe d'une spatule pour soulever délicatement le capteur de proximité hors de son logement dans le panneau frontal.

Essayez de faire glisser votre outil sous tout le capteur pour le décoller du plastique transparent qui se trouve en dessous. Si vous faites levier juste sur la nappe, le capteur pourrait se détacher de la nappe et vous devriez le changer. Si vous êtes en train de remplacer l'ensemble nappe/capteurs, cela n'a pas d'importance.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.