Ana içeriğe geç
İngilizce
Çince
Adım 2
Place a heat shield over the other parts of the motherboard to avoid overheating. Heat the affected area with a heat gun to reflow the solder. Reflowing heats up all the soldering joints in an area so they become liquid enough to reinforce the bonds. This allows electricity to flow through the bond without unexpected resistance.
  • Place a heat shield over the other parts of the motherboard to avoid overheating.

  • Heat the affected area with a heat gun to reflow the solder.

  • Reflowing heats up all the soldering joints in an area so they become liquid enough to reinforce the bonds. This allows electricity to flow through the bond without unexpected resistance.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.