Eşyalarını Tamir Et Topluluk Mağaza

Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 10 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Flemenkçe
Adım 3
Nintendo Switch Headphone Jack and Game Card Reader Replacement: adım 0, 2 resimden 1. Nintendo Switch Headphone Jack and Game Card Reader Replacement: adım 0, 2 resimden 2.

  • Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

  • If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

Gebruik de punt van je spudger om de aansluitingen van de hoofdtelefoonjack en de gamekaartlezer in een rechte beweging van het moederbord omhoog te duwen en los te koppelen.

[* black] Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.
+[* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.
+[* icon_note] If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.