Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Japonca

Adım 29 çevriliyor

Adım 29
Move back to the passenger side. Remove the gas tank old gasket.  I was able to slide this over the assembly without needing to remove it. Likewise, install a new gasket (shown in orange here).  Again, I could slip this over the existing assembly without much effort.
  • Move back to the passenger side.

  • Remove the gas tank old gasket. I was able to slide this over the assembly without needing to remove it.

  • Likewise, install a new gasket (shown in orange here). Again, I could slip this over the existing assembly without much effort.

  • Clean the mating surface of the gasket before installation to ensure a good seal.

  • Push the assembly back into place. The assembly has a tab to align it to the proper direction.

  • Do not make any connections yet.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.