Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 1 çevriliyor
Adım 1
-
Position device upside down so that the screws on the plastic axle pieces can be removed.
-
Use J1 screwdriver bit to remove two 10 mm screws to remove the plastic axle pieces to make access to the telescopic piston easier.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.