Ana içeriğe geç

iPhone 6s 扬声器更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 6 kılavuzları etkileyecektir.

İngilizce
Çince
Adım 5
iPhone 6s Speaker Replacement: adım 0, 1 resimden 1.
  • Remove the following Phillips screws securing the speaker to the rear case:

  • Two 2.6 mm screws

  • One 2.3 mm screw

  • This screw may be covered by some tape.

  • One 2.3 mm screw

  • This screw is different from the prior one. Be sure not to mix the two together.

  • One 3.0 mm screw

卸下将扬声器固定到后壳的以下十字螺钉:

两个2.6毫米螺丝

两个2.3毫米螺丝

一个3.0毫米螺钉

不要将这些螺钉混在一起。他们彼此略有不同!

[* black] Remove the following Phillips screws securing the speaker to the rear case:
[* red] Two 2.6 mm screws
- [* orange] Two 2.3 mm screws
- [* icon_note] Do not mix these screws together. They are slightly different from each other!
- [* yellow] One 3.0 mm screw
+ [* orange] One 2.3 mm screw
+ [* icon_note] This screw may be covered by some tape.
+ [* yellow] One 2.3 mm screw
+ [* icon_note] This screw is different from the prior one. Be sure not to mix the two together.
+ [* green] One 3.0 mm screw

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.