Ana içeriğe geç

2018年末 Mac mini 天线板更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

Adım 1 çevriliyor

İngilizce
Çince
Adım 1
Mac mini Late 2018 Antenna Plate Replacement: adım 0, 1 resimden 1.
  • Remove six TR6 Torx security screws securing the antenna plate, of the following lengths:

  • Three 4.1 mm shoulder screws

  • Three 1.8 mm screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your Mac.

移除固定天线板的六颗TR6 Torx安全螺丝,尺寸如下:

3颗4.1毫米螺丝

3颗1.8毫米螺丝

在这次维修过程中,记录每一颗螺丝的位置,确保它能顺利装回原始位置,避免损坏你的Mac电脑。

[* black] Remove six TR6 Torx security screws securing the antenna plate, of the following lengths:
- [* red] Three 4.1 mm screws
+ [* red] Three 4.1 mm shoulder screws
[* orange] Three 1.8 mm screws
[* icon_reminder] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your Mac.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.