Eşyalarını Tamir Et Topluluk Mağaza

Remplacement de la plaque d'antenne du Mac mini fin 2018

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Fransızca
Adım 4
Mac mini Late 2018 Antenna Plate Replacement: adım 0, 3 resimden 1. Mac mini Late 2018 Antenna Plate Replacement: adım 0, 3 resimden 2. Mac mini Late 2018 Antenna Plate Replacement: adım 0, 3 resimden 3.

  • The antenna cable connector and socket are fragile.

  • Use the point of a spudger or fine tweezers to gently pry the antenna cable connector straight up off its socket on the logic board.

  • To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it straight down until it snaps into place.

  • If you need more slack in the cable, you can temporarily pry it from the clips securing it to the antenna plate.

Le connecteur du câble d'antenne et sa prise sont fragiles.

Utilisez la pointe d’une spatule ou une pincette fine pour retirer délicatement le connecteur du câble d’antenne tout droit vers le haut et le retirer de sa prise sur la carte mère.

Pour reconnecter le câble, prenez une pincette pour l'aligner correctement avec sa prise sur la carte mère, puis appuyez tout droit vers le bas jusqu’à ce qu'il s'enclenche.

Si vous avez besoin que le câble ait plus de mou, vous pouvez le déclipser temporairement de la plaque d'antenne.

[* icon_caution] The antenna cable connector and socket are fragile.
-[* black] Use the point of a spudger or fine tweezers to gently pry the antenna cable connector straight up off its socket on the logic board.
+[* black] Use the point of a spudger or fine [product|IF145-020|tweezers] to gently pry the antenna cable connector straight up off its socket on the logic board.
[* icon_reminder] To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it straight down until it snaps into place.
[* icon_reminder] If you need more slack in the cable, you can temporarily pry it from the clips securing it to the antenna plate.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.