Eşyalarını Tamir Et Topluluk Mağaza

DJI Phantom 4 Advanced Fernbedienung Connectivitiy Platine austauschen

Kılavuza Dön
İngilizce
Almanca
Adım 2
DJI Phantom 4 Advanced Remote Controller Back Con Board Replacement: adım 0, 2 resimden 1. DJI Phantom 4 Advanced Remote Controller Back Con Board Replacement: adım 0, 2 resimden 2.

  • Remove each of the three ribbon cables from their tabs by pulling in a horizontal direction away from the socket.

  • Remove the Back Con Board.

Löse jede Halterung und ziehe vorsichtig das Kabel heraus.

Nun kannst du die Platine entfernen.

-[* black] Pull off each tab. Pull in a horizontal direction out from the socket.
-[* black] Now you may remove the back board.
+[* red] Remove each of the three ribbon cables from their tabs by pulling in a horizontal direction away from the socket.
+[* black] Remove the Back Con Board.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.