Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Almanca

Adım 1 çevriliyor

Adım 1
Peel away and remove all the old display adhesive from the body of your phone. Use the point of your spudger to scour away and remove any lingering adhesive. Using metal tools can lead to scratching the glass!
  • Peel away and remove all the old display adhesive from the body of your phone.

  • Use the point of your spudger to scour away and remove any lingering adhesive.

  • Using metal tools can lead to scratching the glass!

  • If you are reinstalling your existing display, remove all the old adhesive from that as well.

  • For best results, clean the area underneath the removed adhesive with 90% or greater isopropyl alcohol to prep the surface for the new adhesive.

  • While high-concentration isopropyl alcohol is generally safe for use with electronics, it can wear away the foam padding on the midframe. Be careful as you clean the narrow edges of the frame.

Löse alle Überreste des Displayklebers vom Gehäuse deines Smartphones ab.

Schabe mit der Spudgerspitze alle Kleberreste ab und beseitige gründlich alle Spuren.

Wenn du dein altes Display wieder einbauen willst, musst du auch dort alle Kleberreste beseitigen.

Du erzielst die besten Ergebnisse, wenn du die Klebeflächen mit Ispropylalkohol (mindestens 90%ig) reinigst und für die Montage vorbereitest.

Hochkonzentrierter Ispropylalkohol schadet zwar der Elektronik nicht, kann aber den Schaumstoff am Mittelrahmen auflösen. Sei beim Reinigen der schmalen Kanten am Rahmen sehr vorsichtig.

[* black] Peel away and remove all the old display adhesive from the body of your phone.
[* black] Use the point of your spudger to scour away and remove any lingering adhesive.
[* icon_reminder] Using metal tools can lead to scratching the glass!
[* icon_note] If you are reinstalling your existing display, remove all the old adhesive from that as well.
[* black] For best results, clean the area underneath the removed adhesive with 90% or greater isopropyl alcohol to prep the surface for the new adhesive.
[* icon_caution] While high-concentration isopropyl alcohol is generally safe for use with electronics, it can wear away the foam padding on the midframe. Be careful as you clean the narrow edges of the frame.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.