ExoPC Slate Camera Replacement

İngilizce

Japonca

Adım 2 çevriliyor

Adım 2

Using the 00 Phillips screwdriver remove the two screws in the corners.
Using your left hand pull at the exposed section of the PC while simultaneously pushing the right with the thumb of your other hand. This will release the plastic clips allowing back cover to slide off, as shown from the picture
When removing the back cover make sure that the ribbon connectors going to the screen are not damaged. Carefully fold over the cover like a book.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.