Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
İtalyanca
Adım 8
If your replacement part did not come with a flash lens, you must transfer it from your old panel. Use a spudger or your finger to firmly press on the lens from the outward-facing side (the side you can usually see on the phone) of the glass panel until it loosens from its recess. Remove the lens and transfer it onto the back side of the replacement panel.
  • If your replacement part did not come with a flash lens, you must transfer it from your old panel.

  • Use a spudger or your finger to firmly press on the lens from the outward-facing side (the side you can usually see on the phone) of the glass panel until it loosens from its recess.

  • Remove the lens and transfer it onto the back side of the replacement panel.

  • Make sure to orient the flash lens properly such that the fresnel rings are stacked vertically.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.